Ultrasonic Humidifier for Mushroom Cultivation
Le diamètre de travail de 2 m du retourneur de compost à portique peut être personnalisé Humidificateur ultrasonique intégré is a compact, mobile humidity-control system designed for mushroom growing rooms and fruiting areas, using high-frequency ultrasonic atomization to produce 1–10 μm fine mist, helping maintain stable humidity, reduce airborne dust and create a suitable microclimate for mushroom fruiting.
Spécifications clés
|
Spécification |
UHXH9A |
UHXH12A |
|
Type d'équipement |
Humidificateur ultrasonique intégré |
Humidificateur ultrasonique intégré |
|
Humidification Capacity |
9 L/h |
12 L/h |
|
Rated Power |
900 W |
1600 W |
|
Dimensions |
700 × 320 × 560 mm |
700 × 320 × 560 mm |
|
Control Method |
Humidity / Time / ON-OFF |
Humidity / Time / ON-OFF |
|
Mist Particle Size |
1–10 μm |
1–10 μm |
|
Maximum Relative Humidity |
Up to 99%* |
Up to 99%* |
|
Installation |
Mobile / Wall-mounted |
Mobile / Wall-mounted |
|
Water Tank |
Synthetic Resin |
Synthetic Resin |
|
Automatic Water Refill |
Yes |
Yes |
|
Optional Soft-Water System |
Available |
Available |
*Maximum humidity depends on room conditions, ventilation, temperature and the overall environmental-control system.
Caractéristiques principales
- Fine ultrasonic mist:Produces mist particles of approximately 1–10 μm.
- Integrated atomization module:The atomizing module uses replaceable chips, making routine maintenance relatively simple.
- No mechanical drive:The ultrasonic atomization system operates without conventional mechanical drive components, helping provide quiet operation.
- Automatic water replenishment:Reduces the need for frequent manual water filling.
- Multiple control modes:Can be controlled by humidity, time or ON/OFF operation.
- Flexible installation:Can be used as a mobile unit or installed on an exterior wall.
- Optional water-softening system:Can be selected to reduce mineral-related white powder deposits when water quality requires treatment.
- Integrated cabinet:Steel housing with a synthetic-resin water tank.
Principe de fonctionnement
The UHXH9A and UHXH12A use ultrasonic atomization rather than conventional mechanical humidification.
Water Supply
Water is supplied to the integrated water tank. The system can automatically replenish water during operation.
Where local water contains a high mineral content, an optional water-softening system can be used to help reduce calcium-related white powder deposits.
Ultrasonic Atomization
The water enters the integrated ultrasonic atomization module. High-frequency ultrasonic vibration breaks the water into extremely fine droplets without requiring a mechanical drive system.
Fine Mist Generation
The humidifier produces mist particles in the approximate range of 1–10 μm. The fine mist can disperse more readily throughout a mushroom growing room than larger water droplets.
Mist Distribution
The generated mist is discharged into the growing environment, increasing the moisture content of the surrounding air.
Humidity Control
The system can operate according to humidity, preset time or ON/OFF control. The humidity-control system uses a humidity probe to monitor environmental conditions and adjust operation according to the selected control mode.
The provided specifications indicate a control precision of approximately ±5% or better, depending on operating conditions.
Continuous Environmental Management
By maintaining appropriate humidity, the humidifier can help create a more stable environment for mushroom fruiting while also contributing to dust suppression.
Matières premières et applications fongiques appropriées
It is particularly useful in:
Different mushroom species require different temperature and humidity conditions, so the humidifier should be operated according to the cultivation parameters of the specific species and growth stage.
Capacité / Échelle de production et niveau d'automatisation
The two models provide different humidification capacities.
UHXH9A – 9 L/h
The UHXH9A produces up to 9 liters of humidification output per hour and uses a 900 W rated power system. It is suitable for smaller or medium-sized mushroom growing rooms where moderate humidity supplementation is required.
UHXH12A – 12 L/h
The UHXH12A provides a higher humidification capacity of 12 L/h with a rated power of 1600 W, making it suitable for larger rooms or environments requiring a greater humidity supply.
The actual humidification requirement depends on factors such as:
- Growing-room volume
- Room temperature
- Existing ventilation
- Air exchange rate
- Humidité relative cible
- Number of fruiting rooms
- Mushroom species and growth stage
Niveau d'automatisation
The humidifier uses automatic environmental control and can operate through:
- Contrôle de l'humidité
- Time control
- ON/OFF control
- Réapprovisionnement automatique en eau
This makes it suitable for integration into a semi-automated mushroom environmental-control system rather than requiring continuous manual operation.
Integration with Mushroom Cultivation Equipment
Upstream / Supporting Equipment
It can work together with:
- Water Treatment / Soft-Water System
- Water Supply System
- Air Conditioning / HVAC Unit
- Ventilation System
- Capteurs environnementaux
- Mushroom Growing Room
Downstream / Environmental-Control Equipment
The humidifier can support:
- Mushroom Fruiting Room
- Salle de culture de champignons en conteneur
- Mushroom Cultivation Racks
- Ventilation Equipment
- Temperature-Control Equipment
- CO₂ Control System
- Lighting System
- Environmental Monitoring System
Water Supply → Soft-Water Treatment → Ultrasonic Humidifier → Mushroom Growing Room
A typical controlled fruiting room can therefore combine:
Service et FAQ
Installation et service
The integrated design makes installation relatively straightforward. Depending on the project scope, the following services can be provided:
Support can be provided for unit positioning, water connections, electrical connections and wall-mounted installation requirements.
Initial commissioning can include checking water supply, atomization, humidity-control settings and automatic water replenishment.
Operators can be trained in humidity setting, operating modes, routine cleaning and basic maintenance.
The ultrasonic atomization module uses replaceable chips, and replacement components can be supplied according to the equipment configuration.
Technical assistance can be provided for humidity-control settings, water-quality considerations and equipment troubleshooting.
After-sales technical support can be provided according to the project and equipment requirements.
FAQ
The main difference is humidification capacity and rated power:
- UHXH9A:9 L/h, 900 W
- UHXH12A:12 L/h, 1600 W
The two models have the same listed dimensions and control methods.
The specified ultrasonic mist particle size is approximately 1–10 μm, allowing the generated mist to disperse into the growing environment.
Yes. The equipment can operate using humidity control, time control or ON/OFF control. Its humidity-control system uses a probe to monitor environmental conditions, with the provided specification indicating control precision of approximately ±5% or better.
Yes. It can be combined with an Air Conditioner/HVAC Unit, ventilation system, humidity sensors, temperature-control equipment, CO₂ control and mushroom fruiting racks to create a more comprehensive environmental-control system for commercial mushroom growing rooms.
